After building the half wall and fitting in my work table, I realized the wall was in my way! I took it out, and built up the beam above so I could also take out the center support post in the middle of my studio, which was in my way also.
I like this so much better, and it only took some thinking to figure our how to arrange my shelves so there is no loss of shelf space.
As I was beginning to plan where to put all my shelves in the art studio, I realized I didn’t have enough wall space. I decided to build a wall between the two halves of the studio to give me room for all my hanging shelves. I didn’t like how closed off it felt, however, so I cut a large opening in the wall at eye level to open up the space.
Since that leaves me only half a wall when I needed a whole wall, I’m also putting half a wall between the breeze through and the far section of studio. That will allow me to mount all my shelves and still have a view of the entire studio as well as the horse corral and yard.
I thought I would be done with my studio before Thanksgiving but, as I should have known, projects always take 2 to 4 times longer than expected.
With a week of sunny days in front of us, I decided it would be best to work on the outside of the art studio. We had a few days of rain and now with a break in the weather I realize I had better take advantage of the dry.
I could have chosen to have new windows but I had collected these old charmers over the past two years and I just love them. They may not be as energy efficient but I can create a barrier if I need to, from the weather, with clear bubble wrap or plastic.
Much of the siding I have used was given to us through Freecycle. I have begun buying new siding now though.
Look how bright the double room is now with the sheet rock up and ready to finish trimming out and painting. John and Ryan and I spent the last two days working as much as possible to get the ceiling in place. There was a lot of prep work to be done: finishing the insulation, spraying some foam insulation into cracks and crevices all over the place, and making sure there were no screws or nails or dried foam in the way of the sheet rock being raised into place. I only missed one little screw which created a little bubble when I hung that piece of ceiling. I had to cut into the bubble and will patch it later.
This time we rented a sheet rock raising tool to help us lift the large heavy Gypsum boards into place. I appreciated having the tool around for lifting the boards, fitting, and cutting them. It rented for $39 a day at Home Depot. We ended up using it for a day and a half.
I was able to work for three hours at a time and then I would have to take a break and have a snack or meal. I’m pretty happy about how much energy I had today. I was dripping with sweat and I felt so dirty when work was through but I feel blissful and tired after my shower, having accomplished so much.
The insulation you see between the rafters is a stiff foam insulation about 4 inches thick. This came from a greyhound bus station. It was given to my sister Cheryl and I after she found it online. I think she requested insulation through Freecycle. This insulation was bound for the dump but we were able to collect and use it instead.
I am very excited to be working on the designated art studio area in the cottage finally. Once this art studio area is finished I can move all my art supplies out of my very cramped living room studio and into the cottage studio.
Moving my art studio will allow me to open my home back up for family gatherings and more comfortable entertaining of friends. .
I am looking forward to decorating my house for the holidays this year 🙂